Need help?Do you have a question about the Linksys WRT54G2 - Wireless-G Broadband Router and is the answer not in the manual?
General| Wireless Standard | 802.11g |
|---|---|
| Frequency Band | 2.4 GHz |
| LAN Ports | 4x 10/100 Mbps |
| WAN Ports | 1x 10/100 Mbps |
| Security | WEP, WPA, WPA2 |
| Data Transfer Rate | 54 Mbps |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.11g, IEEE 802.11b |
| Wireless Data Rates | Up to 54 Mbps |
| Power | 12V DC |
| Antennas | 2 Internal |
Details the LEDs and buttons on the front of the router.
Describes the ports and buttons on the back of the router.
Explains how to change the default SSID for network security.
Advises changing the default router password to prevent unauthorized access.
Explains the importance of enabling WPA/WPA2 or WEP for wireless security.
Covers the basic router settings and internet connection configuration.
Details how to configure the router's connection to the Internet via ISP settings.
Explains how to configure a static IP address for internet connection.
Describes PPPoE configuration for DSL internet connections.
Covers network settings, including router IP and subnet mask.
Displays the router's IP address and subnet mask.
Configures the router's Dynamic Host Configuration Protocol (DHCP) server.
Details enabling or disabling the DHCP server function.
Sets the initial IP address issued by the DHCP server.
Configures advanced routing functions like Dynamic and Static Routing.
Covers router operating modes (Gateway/Router) and routing types.
Configuration screen for gateway routing settings.
Configuration screen for router routing settings.
Configures fundamental wireless network settings.
Describes methods for easy wireless network setup.
Configures security settings like WPA2 Personal, WPA Personal, etc.
Selects the wireless security method (WPA2, WPA, WEP, Disabled).
Configuration for WPA2 Personal security with AES/TKIP encryption.
Configuration for WPA Personal security with AES/TKIP encryption.
Configures the router's firewall protection.
Enables or disables the firewall.
Allows blocking or allowing internet usage by policy.
Manages internet access policies for specific PCs and times.
Configures port forwarding for public services and applications.
Prioritizes network traffic for high-priority applications.
Manages router functions for access and security.
Provides diagnostic tests like Ping and Traceroute.
Performs a ping test to check connection status.
Performs a traceroute test to check connection performance.
Restores the router's configuration to factory default settings.
Resets router settings to default values.
Explains how to upgrade the router's firmware.
Guides on selecting and applying firmware upgrade files.
Displays the router's current status information.
Displays the status of the router's local network.
Shows MAC address, IP address, subnet mask, and DHCP server status.
Displays the status of the wireless network.
Shows wireless MAC address, mode, SSID, DHCP server, channel, and encryption status.
Provides steps to resolve computer internet connectivity issues.
Troubleshooting steps for wireless connection issues.
To Next Page