PRODUCT DATA
SPA3102
Model No.
PSTN to VoIP Authentication and Features
• PSTN to VoIP Gateway Enable/Disable
• VoIP Caller Auth Method (None, PIN, HTTP Digest)
• Ring Through to FXS Enable/Disable
• Ring Through Tone - Configurable
• Caller ID (Bellcore Type 1) for VoIP Service Access
• Caller ID Enable/Disable
• PIN Max Retry Settings
• Access Allowed Caller List (No Further Authentication)
• Caller PIN and Associated Dial Plan
• Least Cost Routing (via Outbound VoIP - Line1 Dial Plan)
FXO Behavior Features
• VoIP Answer Delay Timer
• PSTN Answer Delay Timer
• VoIP PIN Digit Time-Out Timer
• PSTN PIN Digit Time-Out Timer
• PSTN-to-VoIP Call Max Dur Timer
• VoIP-to PSTN Call Max Dur Timer
• PSTN Ring Through Delay Timer
• PSTN Dialing Delay Timer
•VoIP DIG Refresh Interval Timer
• PSTN Ring Time-out Timer
PSTN Disconnection Detection Features
• CPC (Removal of Tip/Ring Voltage Momentarily)
• Polarity Reversal
• Long Silence (Configurable Time Setting)
• Disconnect Tone (e.g. Reorder Tone)
• Silence Threshold
International Control Features
• FXO Port Impedance - Configurable to 16 settings
• Ring Frequency - Configurable
• SPA to PSTN and PSTN to SPA Gain Settings
• Ring Frequency - Maximum Setting
• Ring Validation Time Setting
• Tip/Ring Voltage Adjustment Setting
• Ring Indication Delay Setting
• Operational Loop Current Minimum Value
• Ring Time-out Setting
• On-Hook Speed Setting
• Ringer Impedance Setting
• Line-in-Use Voltage Setting
• 1 - SPA3102 Phone Adapter Unit
•1 - Power Adapter
•1 - RJ-45 Ethernet Cable
• 1 - RJ-11 Telephone Cable
• 1- Quick Installation Guide
Package Contents
To Next Page
Loading...
