Need help?Do you have a question about the Linksys SPA8000 and is the answer not in the manual?
General| Ports | 8 FXS ports |
|---|---|
| Voice Codecs | G.711, G.726, G.729 |
| Humidity | 10% to 90% non-condensing |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | SIP, MGCP |
| Fax Support | T.38 |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 70 °C |
Steps for physically connecting the gateway, modem, and telephones.
Configure network connection using DHCP, including MAC cloning.
Configure network connection using a static IP address.
Configure network connection for PPPoE DSL users.
Instructions on how to initiate and access the voice configuration menu.
Details on navigating and using the voice commands for configuration.
Reference for IVR commands to configure the gateway's settings.
Technical compliance statement regarding FCC rules for radio frequency energy.
Compliance statement for telephone network connections and equipment.
Important safety warnings regarding fire risk, water, and electrical storms.
Compliance statement for Industry Canada regulations.
Information on proper disposal and recycling of electronic equipment in the EU.
Details of the product's limited warranty, coverage, and exclusions.
Linksys website addresses for product information and support.
To Next Page
