Linksys SPA400

SPA400 Internet Telephony Gateway with 4 FXO Ports
Administration and Configuration Guide v1.0
SPA400 Internet Telephony Gateway with 4 FXO Ports – Administration and Configuration Guide v1.0
© 2006 Linksys
12
Administration: Factory Default
Data – Factory Default
Restore Factory Defaults
Clicking this button will erase the current settings and reset the
SPA400 to the original factory default settings.
Administration: USB Setting
Data – USB Device
File Path
Specify the file to be loaded to the USB storage device.
Download
Clicks this button loads the file onto the USB storage device.
Administration: Firmware Upgrade
Data – Firmware Upgrade
File Path
Click the "Browse" button to browse for the location on your PC
where the firmware upgrade file is stored. Select this file.
Browse
Click the "Browse" button to select the firmware upgrade file on your
PC .
Upgrade
Click this button to start the Firmware upgrade.
Administration: Reboot
Restart System
Clicking this button will restart the SPA400. All SPA400 connections
will be broken.
Status
Gateway
Firmware Version and SPA400 Status
Event Logs
Set Log Levels
SPA400 logs significant events onto its internal buffer.. The events
are categorized into several groups. This page allows you to set the
log levels for each event group.
Event Logs
This page allows you the display the contents of SPA400 event log
buffer. Contents of the log buffer provide technical support
personnel useful information to troubleshoot SPA400 issues.