Linksys SPA8000

10
Interactive Voice Response Menu
Action Command Choices Description
Set Gateway IP
Address
131 First, set the Internet
Connection Type to static IP
address; otherwise, you will
hear, “Invalid Option,” if you try
to set the gateway IP address.
Use the * (star) key when
entering a decimal point.
Check MAC
Address
140 Hear the MAC address of the
Gateway in hexadecimal string
format.
Check Firmware
Version
150 Hear the version number of
the firmware running on the
Gateway.
Check Primary
DNS Server IP
Address
160 Hear the IP address of the
primary DNS (Domain Name
Service) server.
Set Primary DNS
Server IP Address
161 First, set the Internet
Connection Type to static IP
address; otherwise, you will
hear, “Invalid Option,” if you
try to set the IP address of the
primary DNS server. Use the
* (star) key when entering a
decimal point.
Check Internet
Web Server Port
170 Hear the port number of the
Internet Web server used for
the Web-based utility
Set the Mode 201 Router/NAT Mode
- Press 0. Bridge/
Switch Mode
- Press 1.
If the Gateway acts as the
router for your network, use the
router/NAT mode.
If your network already has a
router, use the bridge/switch
mode
Check Local IP
Address
210 Hear the local IP address of the
Gateway.