Linksys USBBT100

8
I know the service I want to use and I want
to find a Bluetooth device that provides
that service.
After you select this option from the Wizard’s
menu and click
Next , the Bluetooth Service
Selection
screen will appear. Select the ser-
vice that you need and click
Next .
Next, the
Bluetooth Device Selection screen
will appear. This screen will list those devices
that provide the service you’ve requested.
Chose the device to which you wish to con-
nect and click
Next to continue.
The
Setup Wizard Completion Screen will
appear next. The name of the service will
appear at the top of the screen and you
can personalize this if you wish. If you wish
to further configure the service you’ve
selected, click
Configure . In most cases,
further configuration is not required. To start
the connection upon completing the Wiz-
ard, select
Start the Connection . A shortcut
to this device will be placed in the
My Blue-
tooth Places
folder. To create more short-
cuts in addition to the one created by
default and restart the Wizard, select
Cre-
ate a shortcut and then restart this wizard so
that I can create additional shortcuts
. Click
Back if you with to go back a step, Cancel
if you wish to leave the Wizard without sav-
ing your changes, or
Finish to complete the
Wizard.
The Adapter will then try to connect to
that device. If a PIN code is required
for security, you will be notified. At this
point, you will be asked for your PIN
code as well as the PIN code for the
other Bluetooth device before the con-
nection can be completed.
The Bluetooth Service
Selection Screen
The Bluetooth Device
Selection Screen
The Setup Wizard
Completion Screen
NOTE: For descriptions of services
provided by Bluetooth devices, see
that device’s documentation.