7
PPPoE
PPPoA
e Enter the DNS in the Primary
and/or Secondary fields. You
need to enter at least one DNS
address.
f Click the Save Settings button
to save the settings.
2 RFC 2516 PPPoE or RFC 2364
PPPoA
If your ISP says that you are
connecting through PPPoE (Figure
D3) or PPPoA (Figure D4), or if you
normally enter a user name and
password to access the Internet,
perform these steps:
a Select PPPoE or PPPoA as
appropriate for the
Encapsulation.
b If you selected PPPoE, enter
the Service Name (if required).
c Enter the User Name.
d Enter the Password.
e Select Keep Alive if you always
want to be connected to your
ISP, or select Connect on
Demand if you are charged
for the time that you are
connected to your ISP.
f Click the Save Settings button
to save the settings.
D3
D4
To Next Page
Loading...
