Linksys WAG54G

6
Dynamic
1 RFC 1483 Bridged
Dynamic IP Address
If your ISP says that you are
connecting through a dynamic IP
address (Figure D1), perform these
steps:
a Select RFC 1483 Bridged for
the Encapsulation.
b Select Obtain an IP Address
Automatically for the IP Set-
ting.
c Click the Save Settings button
to save the settings.
Static IP Address
If your ISP says that you are
connecting through a static or fixed
IP address (Figure D2), perform these
steps:
a Select RFC 1483 Bridged for
the Encapsulation.
b Select Use the following IP
Address as the IP Setting.
c Enter the IP Address and the
Subnet Mask.
d Enter the Default Gateway
address.
Quick Installation
D1
Static
D2