5. Windows will notify you that it has located the appropriate driver and is
ready to install it. Click the Next button.
6. When Windows has completed installing the driver, click Finish.
The Windows 2000 driver installation is complete. Return to the section
on the USB Port Connection to finish the setup.
19
Wireless-G Cable Gateway
3. Select Search for a suitable driver for my device and click the Next but-
ton.
4. Windows will now search for the driver software. Select only CD-ROM
drives and click the Next button.
18
Figure 3-12
Figure 3-13
Figure 3-14
Figure 3-15
To Next Page
Loading...
