Linksys WCG200 - Page 49

LINKSYS WCG200 User Manual
Case
•
Lay down
LEDs
•
Power
Green Blink - Booting / Diagnostics
Green ON - Power On / Device Ready
Orange ON - Error
•
Cable|Activity (Green color)
OFF|Blink - Scanning D/S channels
OFF|ON - D/S channel acquired, Start ranging
process
Blink|OFF - Ranging complete, start DHCP
/TFTP/ToD/Registration
ON|OFF - Registered
ON|Blink - Traffic (Send / Receive)
•
LAN 1 – 4
OFF - No Ethernet Link
Green ON - Ethernet Link
Green Blink - Traffic
Orange Blink- Collision
•
USB LED
OFF - No USB Link or PC Off
Orange Blink-USB cable attached / but drivers not
loaded
Green ON - USB Link / drivers loaded and port
functional
Green Blink - Traffic
•
Wireless LED
OFF - No 802.11g module installed or
Disabled
In Web UI (Default Enabled )
Orange Blink- 802.11g module installed but error
condition
Green ON - 802.11g module is functional
Green Blink - Traffic
Reset Button
•
Restore Factory Default Settings