2
1
A Insert the Setup Wizard CD-
ROM into your CD-ROM drive.
The Setup Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click
Start and choose Run. In the
field that appears, enter
D:\setup.exe (if “D” is the letter
of your CD-ROM drive).
B Click the Setup button.
C After reading the License
Agreement, click Next if you
agree, or Cancel to end the
installation.
D The Setup Wizard will ask you to
choose a wireless mode. Click
the Infrastructure Mode radio
button if you want your wireless
computers to network with
computers on your wired
network using a wireless
access point. Click the Ad-Hoc
Mode radio button if you want
Software Installation and Configuration
for Windows 98SE, Me, and 2000
ATTENTION WINDOWS XP USERS: Go directly to Step 2.
B
C
Before You Begin
Installation of the WMP54G is different for different versions of Windows.
• For Windows 98SE, Me, and 2000, go to Step 1 and then Step 2.
• For Windows XP, go to Step 2 and then Step 3.
To Next Page
Loading...
