9
Mobile Broadband Only
The Power LED will flash for several
seconds during the self-test. It will
be solidly lit when the self-test is
complete.
If the Power LED does not stop
flashing, refer to “Appendix A:
Troubleshooting” in the User Guide
on the CD-ROM.
Click Next.
Follow the on-screen instructions to complete the setup and configuration.
NOTE: For advanced conguration changes, refer to “Chapter 3:
Advanced Conguration” in the User Guide on the CD-ROM.
D.
E.
Check the Router’s StatusCheck the Router’s Status
To Next Page
Loading...
