Linksys WRT54GL Instruction Manual

Sherpa 2
Introduction
This manual guides you through the process of setting up the Linksys WRT54GL
Wireless-G Broadband Router with a basic level of security or password
protection. The router enables any electronic device to access the Internet via
wired or wireless connection. The router is capable of broadcasting wireless up
to the speed of 54Mbps on a wide range of frequency spectrum. This router
comes with security features such as Stateful Packet Inspection(SPI) firewall, Wi-fi
Protected Access II(WPA II), and Network Address Translation(NAT). This Router is
easy to manage and has a user-friendly web-based setup page.
Description of the equipment
Front Panel
There are several light indicators on the front panel of the router that provide its
current status. Following figure can help you identify each of the light indicator.
Image source : Linksys, Cisco Systems

Linksys WRT54GL Specifications

General

I/O ports	4x RJ-45
Rack mounting	No
Security algorithms	TKIP, WPA
MAC address filtering	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	4
Wi-Fi standards	802.11b, 802.11g
Top Wi-Fi standard	802.11g
WLAN data transfer rate (max)	54 Mbit/s
DHCP client	-
Antennas quantity	2
Product type	Tabletop router
Product color	Black, Blue
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %
Windows operating systems supported	Windows Vista Business, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Power source type	AC

Weight and Dimensions

Weight	482 g