Linksys WRT54GL Instruction Manual

Sherpa 4
The router has several ports at the back panel which can be seen below.
Image Source : Linksys, Cisco Systems
1. Reset Button: The Reset button will restore Router’s factory defaults. Press and
hold the Reset button for five seconds to restore the factory defaults for this
router. You can also restore factory defaults via the Router’s web-based utility.
2. Internet/WAN Port: The Internet/Wan port is where you will connect your cable
or DSL Internet connection.
3. Ethernet Ports(1-4): These ports are used to connect PCs/laptops/notebooks
on a wired network.
4. Power: The Power port is where you will connect the power adapter.
Materials and equipment needed
 Linksys WRT54GL Wireless-G Router and its power adapter
 A cable modem and its power adapter
 Two pieces of Ethernet cables, also known as LAN cables
 A laptop/personal computer with a web browser

Linksys WRT54GL Specifications

General

I/O ports	4x RJ-45
Rack mounting	No
Security algorithms	TKIP, WPA
MAC address filtering	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	4
Wi-Fi standards	802.11b, 802.11g
Top Wi-Fi standard	802.11g
WLAN data transfer rate (max)	54 Mbit/s
DHCP client	-
Antennas quantity	2
Product type	Tabletop router
Product color	Black, Blue
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %
Windows operating systems supported	Windows Vista Business, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Power source type	AC

Weight and Dimensions

Weight	482 g