4
Installation
You’ll need to download and install drivers before using your adapter:
1. On a computer with an internet connection, visit
www.linksys.com/support/WUSB6300
in a web browser.
2. Click on Downloads/Firmware.
3. Choose Version 2.0.
4. Download the driver package for the version of your computer’s operating
system (Mac or Windows).
5. WIN: Unzip the folder and double-click the Setup.exe file and follow the on-
screen instructions.
MAC: Unzip the folder and double-click the Setup.pkg file and follow the on-
screen instructions.
If the computer you want to use the adapter with doesn’t have an internet
connection, find another computer that does, then:
1. Visit www.linksys.com/support/WUSB6300
in a web browser.
2. Click on Downloads/Firmware.
3. Choose Version 2.0.
To Next Page
Loading...
