Connecting
Before making any connections, switch off your power 1.
2. either the
left and right Analogue OutBalanced Out
sockets
Connect the Klimax DS 3. Ethernet socket to your network using
4.
5.
If you have a NAS or ripping NAS then you should also ensure this is connected to 6.
your network and powered on
-
www.linn.co.uk/nas for more info
A Media Server is recommended to manage your music collection and provide access
Manager and Asset UPnP, and these are normally pre-installed on your NAS or self-
installed on your home computer if you don’t have a NAS - see www.linn.co.uk/
mediaserver for more info
-
packing and connecting information to get you started - contact your Linn Specialist for
full installation support.
www.linn.co.uk/klimaxds for full instructions on
using your Linn Klimax DS player.
Unpacking
Please retain all packaging for future transport of Klimax DS
Contents
1 x Klimax DS player
1 x mains lead
Positioning
Place unit within range of your network router or switch
Linn recommend the use of separate dedicated network components, including
-
-
www.linn.co.uk/networks for more info
Avoid positioning the unit in direct sunlight as this can interfere with the infra-red
Do not stack components and avoid placing near other heat sources
Allow space all the way around the unit for air circulation
KLIMAX DS
To Next Page
