Majik 109 Loudspeaker Quickstart Guide
IMPORTANT:
This sheet contains guidance on unpacking and setting up your loudspeakers.
Please refer to the printed Safety Information booklet for important safety
information and the online Owner’s Manual for full instructions on using your
loudspeakers.
Unpacking
• The Majik 109 loudspeakers come packaged as a pair; take care when
removing them from their packaging to avoid damage.
• Do not lay the loudspeakers on their face as this will damage the 2K Array.
Contents
Connecting
IMPORTANT:
Before making any connections, switch off your power amplifier(s).
Ensure the positive (+) or red coloured connectors from your amplifier(s)
connect to the positive (+) connectors on your loudspeakers, and that the
negative (-) or black coloured connectors from your amplifier(s) connect to the
negative (-) connectors on your loudspeakers.