05-3044-A
4
Section 2. Overview of the LINX 160 System
The LINX 160 anDrinking Water System employs an ion exchange process which uses electricity rather than chemicals for
operation. LINX technology does not release chemicals to the environment and it conserves water compared to other drinking
water systems that provide similar water quality.
LINX technology provides several important benefits:
• High flow rates: up to 0.75 gallons/minute (gpm), or 2.7 liters/minute, delivered from the tank
• Wastes 90% less water than reverse osmosis drinking water systems under typical usage conditions.
• The Dial-a-Taste control allows adjustment of product water mineral level for optimum taste.
The LINX 160 and LINX 160M systems include:
• One LINX 120 Sediment pre-filter
• One LINX 50 TDS cartridge to reduce contaminants for improved health and total dissolved solids (TDS) for taste.
• One LINX 120 Carbon (GAC) post-filter.
• Space for an optional third LINX 120 filter (eg. a second carbon filter)
• Operation on either 100-120VAC or 200-240VAC
• An internal leak sensor and shut-off valve
• An optional external leak sensor for monitoring remote leaks in other locations
Specification:
Feed Water Quality: Potable water with maximum TDS of 1000 ppm, <20 grains of hardness (340
ppm hardness as CaCO
3
), pH 4 – 10; microbiologically safe
Feed Water Pressure: 20-100 psi (130-690 kPa)
Feed Water and Operating Temperature: 33-100˚F (1-40˚C)
Regeneration: 30 minutes
TDS Rejection (Maximum Dial): ≥85% TDS reduction
Flow Rate to Faucet (from Tank): 0.75 gpm (2.7 liters/minute), maximum
Water Output Volume per Cycle: 0-500 ppm TDS feed: 1.5 gallons (6.0 liters) per 30 min regen cycle
501-1000 ppm TDS feed: 1.0 gallons (4.0 liters) per 30 min regen cycle
Rated Capacity: 1.0 gallon/cycle (4.0 liters/cycle)
Rated Life*: 650 gallons (2500 liters) for all replaceable components: LINX 50 TDS
cartridge, LINX 120 Sediment filter, LINX 120 Carbon filter
Warranted Water Output per Day: ≤25 gallons (100 liters; if product exceeds 25 gallons per day on average, the
warranty is no longer valid)
Water Recovery: 0-500 ppm TDS feed: 70%; 501-1000 ppm TDS feed: 61%
Operating Voltage, Current: 100-120 VAC or 200-240VAC, 50/60 Hz
Outside Dimensions: 13 in (330 mm; depth) x 6.6 in (168 mm; width) x 14 in (356 mm; height)
* LINX 50 TDS cartridge and LINX 120 Sediment/Carbon filter lifetimes are based on extensive testing by the manufacturer.
To Next Page
Loading...