Name: Linx 7900
Brand: Linx
Rating: 5 (1 reviews)

To Previous Page

Page 8 of 8 FA69335–2 English

Jun 2013

How To Change the Print Settings

Linx 5900 & 7900

Use the Up arrow key or the Down arrow key to highlight the required orientation. Then do

one of the following:

• Press the OK key to save the setting and return to the Print Settings page. Then press

the Exit key to display the Print Monitor page.

• Press the Cancel key to discard any changes and return to the Print Settings page.

2.1.8 Reset All Message Sequences

This option resets every sequential field in the Current Message to the start of the sequence.

The following field types are reset:

• Sequential Number

• Text Sequence (7900 only)

• Orientation Sequence (7900 only)

This option is available in the ‘IDLE’ state and the ‘JET RUNNING’ state, but not in the

‘PRINTING’ state.

To Reset All Message Sequences:

At the Print Monitor page, press the Print Settings key to display the Print Settings page.

Then select the Reset All Message Sequences option.

The printer resets all the sequences then displays the following confirmation page.

Figure 6. Reset All Message Sequences: confirmation page

2.1.9 Total Print Count

The Total Print Count option displays the total number of prints made by the printer. This

value is the total of the Print Count values for all messages.

You can see the Total Print Count value at User Level C but you cannot select the option.

69146

Bluehorse Whatsapp:+86 181 6857 5767 Email:sales@cheef.cn

Linx 7900 Setting Manual

Other manuals for Linx 7900