Need help?Do you have a question about the Lionel Celebration Series and is the answer not in the manual?
General| Power | Electric |
|---|---|
| Control | Standard |
| Scale | O Gauge |
| Locomotive Type | Steam |
| Special Features | Smoke |
Instructions for operating the train set using a conventional AC transformer.
Instructions for operating the train set using TrainMaster Command Control.
Overview of operating the locomotive in the conventional environment.
Step-by-step guide for running the train set using a conventional transformer.
Procedure to set the locomotive to operate in a single direction, overriding automatic sequencing.
Explanation of the RailSounds 5.0 sound system features and capabilities.
Instructions for installing a nine-volt battery for continuous sound system operation.
How to use the RailSounds 5.0 system features when operating in conventional mode.
Guide for installing optional buttons to activate whistle and bell sounds on transformers.
Details on triggering crew and dispatcher dialogs using whistle blasts in conventional mode.
How to access RailSounds 5.0 features with TrainMaster Command Control.
Explanation of dialog commands and conversations for CrewTalk and TowerCom in Command Control.
Illustrates sample dialog sequences for the locomotive's operation on a layout.
Introduction to the TrainMaster Command Control system and its components.
Step-by-step guide for running the locomotive using the TrainMaster Command Control system.
Detailed explanation of the functions and commands available on the CAB-1 Remote Controller.
Description of commands accessed via the numeric keypad after pressing the AUX1 button.
Guide to adjusting locomotive performance parameters like chuff intensity, volume, and momentum.
Procedure for assigning a unique identification number to your locomotive for command control.
Steps to reset the locomotive to factory default settings if it becomes unresponsive.
Instructions for adding smoke fluid to the locomotive's smoke unit for proper operation.
Guide to lubricating the locomotive's moving parts for optimal performance and longevity.
How to adjust wire brush shunts on the motor to resolve running issues.
Instructions for replacing the headlight bulb in the locomotive.
Information on the handrails as antennas and how to maintain them for signal reception.
Procedure for replacing worn traction tires on the locomotive's drive wheels.
Instructions for setting the mechanism of the Exploding Boxcar for operation.
How to safely trigger the Exploding Boxcar mechanism.
Step-by-step guide for launching the helicopter from the flatcar.
Instructions for loading the missile onto the missile flatcar for launching.
Procedure for launching the missile from the missile flatcar.
Instructions for replacing the lamp in the operating radar car.
Guide to lubricating the gears of the operating radar car.
Instructions for replacing the interior lamp in the caboose.
Instructions for replacing the rear flashing light bulb in the caboose.
Procedure for returning the product for warranty service or repair.
Fields to complete for warranty registration and service requests.
To Next Page