Need help?Do you have a question about the Lionel Hudson 4-6-4 Steam Locomotive and is the answer not in the manual?
Instructions on placing the locomotive on track and connecting it to the tender for initial setup.
Details Lionel's patented Magne-Traction feature for enhanced pulling power and track stability.
Guidance on operating the Hudson with conventional power and the Liontech Command reverse unit.
How to operate the magnetic die-cast knuckle coupler using a UCS track section.
Explains the installation of the 9-volt battery for the Railsounds II system.
Details variable chuff rate, multi-whistles, bell activation, and shutdown sequences.
Provides additional tips on volume control, incidental sounds, and battery requirements.
Instructions for wiring the Lionel no. 5906 sound activation button for AC transformers.
Introduction to the TrainMaster Command system and its digital communication.
Steps to get the Hudson running using the Command Base and CAB-1.
Explanation of CAB-1 buttons for controlling whistle, bell, direction, and speed.
Details advanced Railsounds II features like DynaChuff and bonus sounds in Command mode.
Guide to numeric keypad commands for volume, smoke, and shutdown sequences.
Instructions for adjusting momentum, boosting, braking, and stall settings.
Information on the handrails' function as an antenna and their careful maintenance.
Step-by-step guide to assigning a unique ID number to your Hudson.
Detailed instructions and diagrams for lubricating the locomotive's axle ends, gearing, and side rods.
How to add smoke fluid to the generator and maintain smoke production.
Specific instructions for lubricating the Pullmor motor armature bearings for smooth operation.
Guide on how to safely replace the locomotive's 14-volt headlight bulb.
Information on warranty coverage, authorized service stations, and factory repair.
To Next Page
General