Need help?Do you have a question about the Lionel K-LINE EP-5 and is the answer not in the manual?
General| Type | Electric Locomotive |
|---|---|
| Scale | O Scale |
| Road Name | New Haven |
| Power | Electric |
| Minimum Curve | O-31 |
| Features | Directional lighting |
Place your EP-5 on O gauge track and power up with your transformer. Operate on 8-18 volts AC.
Periodically apply gear lubricant to truck drive gears and sparingly oil wheel bearings. Lubricate after storage.
Traction tires may wear during normal use. Contact an Authorized Lionel Service Center for replacements.
Install a 9-volt battery for uninterrupted operation. Replace if RailSounds drops out during power interrupts.
Explore engine roar levels, horn, bell, RPM control, reverse unit reset, and shutdown sequences.
Operate your EP-5 using a Command Base and CAB-1 remote. Track power provides energy, digital commands control actions.
Details on using CAB-1 buttons like AUX, BELL, DIR, BOOST, and BRAKE for locomotive control.
Learn numeric keypad commands for volume, RPM, CrewTalk, shutdown sequences, and TowerCom announcements.
Adjust locomotive responsiveness with Light, Medium, or Heavy momentum settings (L, M, H).
Use BOOST and BRAKE buttons for incremental speed control and enhanced braking effects with squealing sounds.
Adjust master volume with a set screw or use CAB-1 keypad for remote volume control and muting.
Set high voltage for maximum speed to prevent derailing. Turn off by pressing SET and BOOST.
Set a stall voltage for responsiveness. Locomotive stops, then throttle increases speed until it just stops again.
To Next Page