Lionel Operating Lighthouse - Page 5

Wiring and operating your Lighthouse with TrainMaster Command
Control (continued)
Accessory Switch Controller wiring and operation
F
ive wires are needed to connect your Lighthouse to the ASC and a separate accessory
transformer. Connect the Lighthouse as shown in Figure 3.
Use the AUX2 button on your CAB-1 Remote Controller to toggle the Lighthouse beacon ON and OFF;
press the AUX1 button to sound the foghorn.
The beacon and foghorn do not share the same accessory number. Be sure to address
the appropriate ID# before pressing AUX1 or AUX2.
5
SOUND
POSTS
TRANSFORMER
POSTS
A
U
Figure 3. ASC connections
Note!