To Next PageTo Next Page
Need help?Do you have a question about the Lionel PowerMax Transformer and is the answer not in the manual?
General| Type | Transformer |
|---|---|
| Power Output | 180 Watts |
| Input Voltage | 120V AC |
| Output Voltage | 0-18V AC |
| Compatibility | Lionel and other O/O27 gauge trains |
| Features | Circuit breaker protection |
Essential safety guidelines for using the Lionel PowerMax Transformer indoors.
Instructions for physically mounting the PowerMax Transformer to a layout or panel.
Recommendations for wire gauge and secure connections for efficient power distribution.
Step-by-step guide on how to attach a Lionel Lockon to the track.
How to connect wires to transformer terminals 'A' and 'U' from the Lockon.
Instructions for connecting the FasTrack terminal section to the transformer.
How to use the throttle to increase or decrease train speed for realistic operation.
Interpreting the green light status for normal operation and potential overloads.
How to change train movement direction or set the locomotive to neutral.
How to activate whistle or horn sound effects on Lionel locomotives.
How to activate the bell sound effect on sound-equipped locomotives.
Information on the transformer's amperage limits and voltage behavior under load.
Explanation of the fold-back mode for handling power overloads to prevent damage.
Solutions for problems like no power, non-functional buttons, and slow speeds.
Steps to take when the green light flashes or the unit shuts down due to overload.
A section for miscellaneous notes or reminders.
Information regarding the product's one-year limited warranty.
How to obtain service, repair, or replacement for the product.
