Lionel ZW User Manual

INSTRUCTIONS
LIONEL TYPE ZW TRANSFORMER
115 VOLTS
60 CYCLES
275 WATTS
ALTERNATING CURRENT ONLY
INTRODUCTION
Lionel electric trains operate on low voltage, ranging from 8 to 18
volts. Lionel Transformers reduce or transform the available house volt-
age to the low voltage required. The pl ug at the end of the transformer
cord is plugged into any convenient wall outlet of 115 volts, 60 cycles
alternating. current. The low voltage for operating trains and accessories
is then obtained from the output terminals at the rear of the transformer.
The wattage rating of the H ZW" Transformer is' 275 watts. The
wattage of a transformer is a measure of its capacity or ability to furnish
power. The wattage of the transformer you need is governed by the kind
and number of trains and the number of lights and operating accessories
in your model railroad system. The larger the train and the greater the
number of accessories, the more power you need and the higher should be
the wattage rating of the transformer.
Page 1

Lionel ZW Specifications

General

Type	Transformer
Manufacturer	Lionel
Output Voltage	Variable
Features	Circuit breaker protection
Input Voltage	120V AC
Weight	10 lbs
Name	Lionel ZW

Summary

Introduction to Lionel ZW Transformer

Transformer Controls and Operation

Connecting Transformer to Track

Guide for connecting the transformer's output to the train track system.

Wiring Procedure for Track Connection

Step-by-step instructions for wiring the transformer to model railroad tracks.

Circuit Breaker Operation and Safety

Explanation of the automatic circuit breaker's function and overload protection.

Connecting Accessories

Operating Model Train Layouts

Operating Additional Trains

Techniques for running multiple trains independently using the transformer.

Replacement Lamps Information

Details on identifying and replacing the transformer's indicator lamps.

Lionel Warranty Information