Lionelo EMMA PLUS - Wheels Installation; Using the Stroller; Safety Belts

‑ 7 ‑ EN
Wheels installaon:
1. Insert the front wheel’s stem into the front guide and push the wheel’s stem
unl the lock snaps into place (g. 9).
Please ensure that the wheel has been properly installed and locked in
the guide.
2. Insert the rear wheels’ stem into the rear guides and push it unl the lock
snaps into place (g. 10).
Please ensure that the wheel has been properly installed and locked in
the guide.
3. Place the buons on each side of the axle and put on the wheels (g. 11).
4. Aer you install the wheels on the axle, put on another shims and secure
them with coers.
Then, put on a rim cover (g. 12).
Please ensure that the wheel has been properly installed and locked.
Using:
1. Front wheel lock (g. 13).
2. Unfolding the canopy (g. 14).
3. The front wheels rotate around their axis, but it is also possible to lock them
so that the stroller can be pushed straight ahead.
4. Parking device: press to lock the stroller. Li to unlock it.
5. The backrest adjustment bucket is located behind the backrest (g. 15).
6. Footrest adjustment buon (g. 16)
7. The stroller’s footrest can be adjusted to 2 dierent posions. In order to
do so, press the footrest adjustment buon.
Safety belts:
Note: Make sure that the posion of the safety belts is correct and they are not
twisted.
1. Insert the le and right clasp into the main buckle. You should hear a „click
sound” indicang that the belts have been properly fastened (g. 17).
2. In order to unfasten the safety belts, press the buon on the middle of the
buckle and pull the clasps out (g. 18).
3. Belts length adjustment Move the clasps on the right and le belt to adjust
the length (g. 19).