EN
5. When the battery is full, the battery symbol is on and does not flash.
6. You can use the breast pump when charging the battery but please be highly careful.
CLEANING AND DISINFECTING
1. When you finish using, disassemble the breast pump and clean the main device with
a dry and soft cloth.
2. Before the first use and after every use, disinfect all elements contacting milk (milk bot-
tle, body, valve, nozzle and silicone funnel).
To disinfect, immerse all elements in the boiling water and leave for 10 minutes. Make
sure all elements have been immersed in water and none of them touches a dry part
of the vessel as they may melt.
NOTE
The main device, USB cable and feeder must not be disinfected and cleaned with water. Only
accessories having a direct contact with milk must be disinfected. When cleaning, be careful
because damaged elements may cause the breast pump to malfunction.
The pictures are for reference only. The real design of the products
may be dierent from the pictures presented.
To Next Page
Loading...