Lionelo Haari - Handle Height Adjustment; Rear Wheel Locking Mechanism; Free Wheel Pedal Functionality; Tricycle Disassembly

‑ 7 ‑ EN
the outside and set the inclinaon angle. Make sure that the buon on the
back of the seat is latched and the backrest is locked (Fig. 11-13).
7.
Insert the parent’s handle into the corresponding place on the frame and
secure it with the red buon (Fig. 15, 16). Put on the basket (g. 14)
8. Put the footrests on the right places on both sides of the fork (Fig. 17)
Handle height adjustment
Adjust the height of the parent’s handle by pressing the clips on its parent frame
and moving the handle in the desired direcon. A 3-step adjustment of 91 - 107
cm is possible.
Locking the rear wheels
Depress the brake feet on both wheels to lock the rear wheels. Move it down to
lock the wheel or up to unlock it. Both brakes work independently of each other.
How to lock pedals – free wheel funcon
The three-wheeled bike has a free wheel funcon. When using this funcon, the
child can pedal regardless of the speed of the bike.
To set this conguraon, switch the lever on the side of the wheel. If you want
the movement of pedals to lead to movement of wheel, switch this lever again.
If your child uses a tricycle alone, make sure that the freewheel funcon is disabled.
How to disassemble the tricycle
To assemble the device:
1. Unscrew the seat at the boom of the frame and remove it with the base.
2.
Remove the screw that secures the handlebar to the frame. Disassemble
the steering wheel and slide o the front wheel.
3. Unhook the headband using the buon on the side.
4.
Disconnect both rear wheels (each has a silver lock buon that must be
released rst).
5. Unlock the parent handle lock (red buon at the boom) and pull it out.
6. Remove the footrest and cup holder.
For transport purposes, lower the tricycle steering wheel by pushing the red
buon, then fold the seat backrest and secure it with the railing by closing it
above the backrest.