Lionelo Hugo - Safety Seat Components and Adjustments; Safety Seat Outline; Backrest Fixing Procedure; Headrest Adjustment

‑ 8 ‑EN
Safety seat outline (g. 2)
1. Headrest
2. Backrest
3. Seat
4. Seatbelt handle
5. Seatbelt guide
6. Height adjustment handle
7. Backrest hinge
8. ISOFIX xing arm
9. Bole holder
How to x backrest
1. Place the backrest horizontally behind the seat, put the hinge on the seat
connector (g. 3A).
2. Straighten the backrest so that the hinge is inserted in the seat connector
(g. 3B).
3. Straighten the backrest completely (g. 3C).
NOTE: When assembling the backrest, make sure there is nothing between
the backrest and seat. Watch your ngers during assembly.
How to adjust headrest
NOTE: Do not use the safety seat if it has not been secured in the car. Place the
child in the safety seat once you have nished assembly.
Thanks to a properly secured headrest, the seatbelt is properly posioned and
your child is provided with comfort and safety.
The headrest can be adjusted in eleven posions. The headrest height must be
adjusted in a way that two ngers t between child’s arms and headrest (g. 4).
To set the headrest height (g. 5):
1. Grab the handle behind the headrest and pull upwards gently.
2.
Adjust a suitable headrest height. When you release the handle, the headrest
will lock in posion.
3. Place the safety seat in the car.
4. Check the headrest for proper height when the child is in the safety seat. If
the height is wrong, repeat the procedure.