Lionelo Kori - Advanced Features, Modes, and Care; Adjust Seat Position and Handle Height; Locking Mechanisms and Independent Mode; Disassembly and Transport Procedures

‑ 8 ‑EN
handlebars. To do so, press the buon marked as B in g. 16 and incline the
handlebars.
How to adjust the seat front-back
ATo adjust the posion, loosen the bolt located at the boom of the seat. Aer
seng the desired posion, ghten the bolt up again.
To adjust the height of the handle
Adjust the height of the handle by pressing the interlock located at the top of
the handle. A 3-level adjustment is possible.
How to lock rear wheels
To lock rear wheels, press both brakes with a foot.
How to disassemble and transport
In order to fold the product:
1. Undo the seat at the boom of the crossbar and remove it.
2. Detach the bow with buons located on sides of the seat.
3. Undo the handlebars: press C buon in g. 16 and take the element o.
4. Press the clip on the shank of the front wheel, pull out the front wheel from
the bike crossbar.
5. Detach rear wheels (each of them has an interlock buon which must be
released in the rst place).
6. Unlock the parent’s handle interlock (at the boom) and take it out.
7. Remove footrests, cup holder and baskets.
For transportaon purposes, take the following steps: fold the seat backrest,
fasten the bow at the top, detach the parent’s handle.
Cleaning and maintenance
• Check the bike on a regular basis and take care of its technical condion so
that it does not pose a threat to the child.
• Wash the bike with a so cloth. Do not immerse the bike in water and do
not pour water on it for cleaning purposes.
•
Regularly check the bike for any loose elements or damaged parts. It is
forbidden to use the bike with defecve parts.