Lionelo Leonie - Beside Sleeper Setup and Use; Cleaning and Maintenance

‑ 9 ‑ EN
5. Beside sleeper funcon
To make use of the bedside sleeper funcon, it is necessary to prepare the
product for use. To do so:
1. Detach zips on both sides of the opening side.
2.
Unlock the rail protecon and drop the side wall of the carrycot. Next secure
the rail to the base of carrycot with the use of clasps (see g. 9).
3.
Push the bedside sleeper closer to parents’ bed and check height of the bedside
sleeper in relaon to maress (see g. 11).
NOTE! When using the crib as an bedside sleeper, its height must be idencal
on all sides.
4. Use belts supplied to aach the bedside sleeper to the parents’ bed. Lock
the belt buckle posioned on the side o the bed’s base. Next carry the belt
from the boom to the top, around the structure of parents’ bed and lock
the buckle on the other side.
5.
Tighten up belts and make sure the bedside sleeper has been properly
aached to parents’ bed (see g. 12).
WARNING! Before every use, make sure there is no gap between parents’
maress and side wall of the bedside sleeper.
6. How to clean and maintain
• Wash the crib’s covering in the washing machine at the temperature of 30ºC.
• Use so agents.
• Never use a bleach. Do not dry in the sun. Avoid direct sunlight or heat.
• Do not iron or wash dry.
• Every me you wash it, check resistance of fabrics and seams.
•
Clean metal and plasc parts with a sponge, lukewarm water and so detergent.
Never use a bleach.
•
Never clean any elements of the crib with abrasive materials, ammonia, bleaches
and alcohol.
• Always store the crib in a dry place to avoid mold. Keep away from sources
of heat and do not store the crib in the sun.
•
You can clean the maress with a wet cloth and natural agents. Hand washing
in water is allowed up to 30ºC
The pictures are for reference only. The real design of products may dier from the
pictures presented.