Lionelo Leonie - Product Usage and Adjustment; Moving and Height Adjustment; Cradle Mode Operation; Disassembly Instructions

‑ 8 ‑EN
• Close the side wall of the crib by liing the moving upper rail. Connect the
connector of the rail unl it engages. Next zip up and cover the connector
(see g. 4).
• Zip up sides of the crib with the use of side zips (see g. 5).
3. How to use
How to move crib:
• Hold the rail of carrycot, li it and push to move the crib. Rear bases of frame
legs are an-skidding, which prevents accidental movement of the crib (see
g. 6).
How to adjust height:
• Press the bed height adjustment key and set the desired height. There are 6
height levels available. It is also possible to set various heights on both sides
(see g. 7).
WARNING: Permissible maximum inclinaon of the bed is a dierence of 2 levels.
Child’s head must always be on the higher posion.
NOTE! Before you change the height, take the child out of the crib.
Cradle funcon:
• To change the crib into cradle, take out leg supports and turn upwards (see
g. 8).
4. How to disassemble
• Take the maress out.
•
Detach side zips of the carrycot and rail zip. Release the protecon connecng
the rail and drop the side wall of carrycot. Next secure the rail to the carrycot
base with the use of clasps (see g. 9).
• To separate the frame of the carrycot from frame of the base, simultaneously
press both buons on upper ps of the crib.
• To remove covering of the crib for washing, press the key from the internal
side of the frame leg. Next grab and take the carrycot frame out (see g. 10).
• Unlock the rail protecon, detach all zips and remove the covering from the
carrycot.