Lionelo Levi Simple - Seat liner; How to adjust the headrest height; How to secure the child with child safety seat belts properly.

EN
The place in which you assemble the child safety seat must be equipped
with a 3-point safety belt (group I, II, III).

For protecon of your child
 The seat liner (K) in your car is intended for babies, improves their
comfort and provides addional support. If the child needs more
space in the child safety seat, remove the seat liner. 

 The headrest of the child safety seat can be set at 6 levels.

Pull the headrest height adjustment lever (N) to adjust the headrest
height. 
 Choose a suitable height of the headrest for your child; make sure
the headrest does not press against the child’s arms and child’s
head is not higher than the upper part of the headrest. 



Loosen shoulder belts in accordance with the manual (see chapter 2.4.)
 Do not pull protecve cushions located on the belts.

Press the red buon on the buckle (J) to unfasten 5-point safety
belts and open the buckle with belts (I). 

Next place child safety seat belts on sides, put the child in. 
 Adjust the headrest height (see chapter 2.2).
 Adjust the height of the shoulder belts (see chapter 2.4). Pull the
belts tension adjustment (M) so that belts t ght the child’s arms.
Make sure the cushion touches the child’s arm and is not twisted
with belts. 
 Join the right and le part of the child safety seat belts. 