Lionelo Levi Simple - How to adjust child safety seat belts.; How to disassemble and install 5-point child safety seat belts.

 EN
 Put two parts of the belts into the buckle unl you can hear
a disncve „click”. 

The child safety seat belts can be set at 3 levels.
 Check if the height of 5-point safety belts is suitable for your child.
The belts must go through slits located at arms level or slightly
above. Remove ps of shoulder belts aached to the safety belt
connector (Q). Pull both belts through slits in the child safety seat
backrest. Again pull the belts (from the front to the back of the
product), this me through slits whose height corresponds to the
size of your child. Put the belts into the relevant hole and aach
the belts to the belt connector (Q). 
To loosen belts:
 Press the belt tension adjustment buon (F).

Gently pull both safety belts of the child safety seat with another
hand, this is how you can loosen the belts. 
To ghten belts:
 Pull the belt tension adjustment (M) (g. 1).
 Make sure the belts are not too ght for your child. 


Before you assemble the child safety seat for group II and III, please
disassemble the child safety seat belts.
 How to remove 5-point safety belts.
 Press the belt tension adjustment buon (F), loosen 5-point safety
belts and unfasten belts. 

Remove ps of shoulder belts aached to the safety belt connector