Lionelo Malin - Page 7

‑ 7 ‑ EN
etc.) on them, which may lead to suocaon risk.
10. The maximum thickness of the maress is marked with
a gray line on the internal side of the crib. Do not use thicker
maresses than permied.
11. Be aware of the threat posed by a cigaree, naked ame or
other sources of high temperature, such as electric heaters,
gas water heaters, etc. near the crib.
12. DO NOT use crib if any parts are missing, damaged, or broken.
Contact Lionelo for replacement parts and instruconal
literature if needed. DO NOT substute parts.
13. Maximum inclinaon allowed is the inclinaon to which the base
can be reclined using the maress inclinaon adjustment strap.
WARNINGS for the maress:
1. Do not use the maress if any of its elements is broken, torn
or missing. Use only spare parts approved by the manufacturer.
2. Do not use more than one maress in the crib.
3. WARNING – Be aware of the risk of open re and other
sources of strong heat, such as electric bar res, gas res,
etc. in the near vicinity of the cot.
Descripon of parts
1. Maress
2. Main part of the crib
3. Folding key
4. Swinging lock lever
5. Leg
6. Maress inclinaon angle adjustment strap
How to unfold the crib
1. Li both sides of the crib frame at the same me (g. 1). If you can hear a click,
it means that the main part of the crib has been properly unfolded (g. 2).
2.
Insert legs in relevant holes in the base of the main part of the crib, pressing
the lock key at the same me (g. 3). If you can hear a click, it means that
legs have been properly installed (g. 4, 5).