Lionelo Malin - How to Clean and Maintain

‑ 8 ‑EN
3. Snap covering fasteners (g. 6).
4. Put the maress into the crib (g. 7).
5.
To adjust the inclinaon of the maress, fasten the buckle on the adjustment
strap and adjust to obtain the desired height.
When taken out of the packaging, the maress may be curved. It is natural due
to packing method. To straighten it, bend the maress in the opposite direcon
(g. 18).
Cradle funcon
1. To lock the cradle funcon, pull out the lock lever in the base of the main
part of the crib (g. 8).
2.
To unlock the cradle funcon, press the lock lever (g. 9). Now the crib can
swing to the le and right rhythmically.
How to fold the crib
1. Take the maress out of the crib (g. 7).
2.
Press folding keys on both sides of the crib and lower plasc protecon (g. 10).
3. Gently press the crib frame on both sides (g. 11).
4.
Remove legs by pressing the lock key (g. 12). The crib is now folded (g. 13).
How to remove the covering
To remove the crib covering, undo fasteners (g. 6) and zip (g. 14). Remove
the covering as showed in g. 15.
Sunshade and mosquito net – applies to MALIN EVO
1. To install the sunshade, catch plasc holders on the frame and snap the
fastener in the crib covering (g. 16).
2. Plasc handles of the sunshade must be put on a specially designated slot
on the frame (g. 17).
3. You can put the mosquito net on the sunshade with a zip.
How to clean and maintain
1. Clean the crib frame with a wet cloth.
2. You can hand wash the covering at the max. temperature of 30°C.
3. Regularly clean the crib and check its technical condion.