Lionelo Mona - Page 10

‑ 10 ‑EN
H - Metal connector of the high chair
(x1)
I - Plasc tray
J - Footrest
K - Seat with backrest
L - Seat base
M - Belt aaching the booster seat
on the chair (x2)
N - Screw (x4)
O - Allen key
P - Silicone tray
Chair funcons (g. 3):
1. Highchair (from 0,5 to 3 years of age, up to 15 kg)
2. Booster seat (from 0,5 to 3 years of age, up to 15 kg)
3. Low chair (up to the age of 5, up to 25 kg).
4. Bar stool (up to 75 kg)
How to assemble the highchair (1):
There are leers (R, R1, L, L1) embossed on plasc ps. During assembly, adjust
parts in the following way:
1.
Put 2 legs of the highchair (A) into 2 plasc front sheaths (R1, L1), unl
you hear a characterisc click (g. 4).
2.
Put 2 legs of the highchair (B) into 2 plasc rear sheaths (R, L) unl you
hear a characterisc click (g. 4).
3. Put 4 long legs (A and B) into designated places (R, R, L, L) in the seat base
(L), unl you hear a characterisc click (g. 5).
4.
Fix 3 metal connectors of the highchair (G and H) between high legs,
adjust connectors and ghten 4 screws (N). To do so, use the Allen key (O).
Assemble the footrest (J) to nish the procedure (g. 6).
5.
Put the seat with backrest (K) into the seat base (L), unl you hear a
characterisc click (g. 7).
6. Put the plasc tray on (I) (g. 8).
7. Put the top silicone tray on (P).
8. Check if the chair is stable (g. 9).
9. Put the child in and secure with 5-point belts located in the seat covering.
How to assemble the low chair (3):
There are leers (R, L, RR, LL) embossed in the plasc ps. During assembly,
adjust parts in the following way: