Lionelo Oliver - Seat Components and Belt Adjustments; Child Seat Component Identification; Fastening Child Safety Seat Belts; Adjusting Child Seat Belt Tension

‑ 10 ‑EN
Descripon (g. 3, g. 4)
A. Shoulder belts guide
B. Child safety seat cover
C. Belts protecve pad
D. Shoulder belt
E. Buckle
F. Undo buon
G. Crotch pad
H. Belt tension adjustment buon
I. Belt tension adjustment
J. Seat liner
K. Base
L. Seat lng handle
M. Hip belt guide
N. Headrest
O. Headrest height adjustment lever
P. Shoulder belt guides
Q. Upper belt connector
R. Manual locker
S. TOP-TETHER belt fastener
T. TOP-TETHER belt length adjustment
U. ISOFIX arms
V. ISOFIX buon
W. ISOFIX pads
HOW TO ADJUST
HOW TO FASTEN CHILD SAFETY SEAT BELTS
To fasten belts in the child safety seat (g. 5):
1. Connect belt buckles.
2. Insert them in the fastening, you will hear a disncve „click”.
3. Make sure the belts have been properly ghtened and are not twisted.
To undo 5-point belts of the child safety seat: press the red buon (F) on the buckle and
loosen the belts.
HOW TO ADJUST CHILD SAFETY SEAT BELTS TENSION
1. To ghten the belts, pull the tension adjustment strap (I) (g. 8).
2. To loosen the belts, press the adjustment buon (H) and pull the shoulder belts (g. 9).
Note! Make sure the child safety seat belts t the child’s body ght and are not twisted. Make
sure the hip belts go low and secure the child’s pelvis. The belts must be ght in relaon to
child’s body, yet must not be too ght and cause discomfort.
HOW TO DISASSEMBLE CHILD SAFETY SEAT BELTS
1. Open the manual locker (R).
2. Pull out the metal belt connector (Q) from the plasc fastener and then remove belts
(g. 15a).
3. Loosen the belts as much as you can (see chapter: