Detailed installation instruction
Important
information
Note:
Please read this manual carefully before
using the car safety seat and keep it for
future reference. Improper installation may
lead to a serious threat to the life of your
child!
Warning:
Do not use only 2 points of the
safety harness. To provide
maximum safety, always use all
the 3 points.
Please use the safety seats in strict accordance with
local laws and regulations.
The vehicle safety belt must be approved by ECE R16
or other equivalent standard.
Do not mount the safety seat in a front car seat with an airbag, unless it is
disable.
Otherwise it can cause death or a serious injury of the child.
Please check the manual of your vehicle to find the information
regarding the installation of a child safety seat. As far as children
aged 0-12 are concerned, vehicle’s back seats are the safest place to
mount the safety seat.
This safety seat has to be installed in a forward-facing position. Do
not mount it sideways or in a rear-facing way.
In case of any doubts regarding the installation of the safety seat, please
contact your vehicle dealer.
Proper and improper installation of the safety seat:
This is the ISOFIX car safety seat compliant with ECE
R44/04.
It can only be mounted in the cars equipped with ISOFIX
connectors.
The product must be installed in a car (according to
the vehicle’s manual) in a place and position suitable
for a given group and an ISOFIX type.
This safety seat is designed for the I, II and III ISOFIX
age group, that is for children weighing from 9 to 36
kg.
A
Wrong position
B
A
It cannot be installed
A
in a vehicle with an active airbag
B
It can be used with a 3-
point safety harness.
To Next Page
Loading...
