Lionelo Tris - Saddle Backrest Adjustment; Adjusting Saddle Position; Pedal and Freewheel Functionality; Engaging Freewheel Feature

‑ 8 ‑EN
How to adjust a saddle backrest
To change posion of the saddle, press the red buon at the back of the backrest. Keeping
this buon pressed, set the backrest at the desired posion. When you release the buon, the
saddle backrest will lock in the selected posion. The adjustment is gradual (at 5 levels) and
for transportaon purposes allows folding the saddle in the opposite direcon – to the front.
How to lock pedals – freewheel feature (13)
A tricycle has a freewheel feature.
When using this feature, a child may pedal regardless of the tricycle speed.
To choose this conguraon, press a red buon at the entrance to pedal and then insert the
pedal in this hole. At this moment you can release the red buon.
Push the pedal unl you can hear a „click” which suggests locking. In this posion it will not
be coordinated with the wheel and will not cause it to move.
If you wish move of pedals to cause move of wheel, press the red buon again. Press the metal bar unl
it resists. You may need to rotate the pedal around its axis to make it get deeper. Release the red buon.
If your child uses a tricycle alone, make sure that the freewheel funcon is disabled.
How to lock/unlock the handlebarsy (14)
To lock/unlock the handlebars, switch the black lever on the mudguard. The wheel must
be posioned straight, and a disncve click will signal proper compleon of the process.
The lever directed downwards will unite the handlebars with the wheel. When you slide it upwards,
it will be unlocked and allow the child to use the handlebar regardless of direcon of riding.
How to lock rear wheels
To lock the rear wheels, press brake pedals by both wheels. Slide them downwards to lock
the wheel or upwards to unlock it. Both brakes are independent.
How to fold and unfold an older child footrest
To fold or unfold the child footrest, push the black frame downwards and set the footrest in
the desired posion. You can fold pedals to vercal posion by pushing towards the frame (15).
How to disassemble the tricycle
In order to fold the device, do as follows:
1. Undo the saddle and remove it.
2. Undo the footrest by the handlebars and remove it. Hide the second footrest under
the saddle.
3. Fold the handlebars by sliding the red buon on the handlebars upwards.
4. Take the front wheel out – press a black buon on the internal side of the front
frame rmly.
5. Disconnect both rear wheels – each of them has a silver lock buon just next to a brake
which must be released in the rst place .
6. Fold the handle.
7. Fold the frame – to do so, rst press the main folding buon presented in the photo
(16) and make the movement opposing the unfolding movement.