To Next PageTo Next PageHow to fix Lippert Cooktop burners that do not ignite?
To fix burners that won't ignite on your Lippert Cooktop: First, push in and turn the surface control knob to the correct position until the burner ignites, then adjust to the desired flame size. Also, make sure the gas supply valve is open. If that doesn't work, with the burner off, use a small-gauge wire or needle to clean any blocked ports or slots.
Why is the flame orange on my Lippert Furrion FGH12D2-BL surface burner?
If the surface burner flame on your Lippert Cooktop is orange, it might be due to dust particles in the main gas line. Let the burner run for a few minutes; the flame should turn blue. Also, in coastal regions, a slightly orange flame is normal because of salt air.
What to do if Lippert Cooktop surface burner flame burns halfway around?
If the surface burner flame on your Lippert Cooktop only burns halfway around, it could be due to moisture on the burner. Thoroughly dry the burner. You can also clean the ports with a small-gauge wire or needle when the burner is off. If moisture remains after cleaning, lightly fan the flame and let the burner run until the flame is full, ensuring the burners are dry.
General| Brand | Lippert |
|---|---|
| Model | Furrion FGH12D2-BL |
| Category | Cooktop |
| Type | Gas Cooktop |
| Number of Burners | 2 |
| Color | Black |
| Material | Stainless Steel |
| Fuel Type | Gas |
| Gas Type | Propane |
| Ignition Type | Electric |
General safety advice and warnings for installation, adjustment, service, and operation to prevent injury or death.
Specific safety warnings related to the operation of the cooktop, including fire and burn hazards.
Details on preparing the cabinets and counter space for proper cooktop installation, including dimensions.
Lists the components included in the packaging for the cooktop appliance.
Step-by-step instructions for physically installing the cooktop into the prepared cabinet opening.
Procedure for connecting the cooktop to the gas supply line, ensuring a secure and leak-free connection.
Procedure to test the gas pressure to ensure it is within the specified range for safe operation.
Instructions for detecting gas leaks using a soapy water solution after installation.
Guidance on connecting the cooktop to the 12V DC power supply, emphasizing correct polarity.
Step-by-step instructions for lighting the cooktop burners using standard or manual ignition methods.
Description of ideal burner flame characteristics and troubleshooting for improper flame appearance.
Explanation of the control knob backlight function and indicator lights.
Procedure for safely turning off the cooktop burners and ensuring the gas supply is secured.
