3
lippert.com 432-LIPPERT (432-547-7378) Rev: 04.12.22
Odyssey Portable Grill
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-005471
Operation
NOTE: When using your Lippert Odyssey Portable Grill for
the first time, the charcoal drum may have a thin coating of
oil on the surface as a result of the manufacturing process.
This may cause the grill to smoke for the first few minutes
as the grill becomes hot. Allow the grill a 3-5 minute “burn
off” period to remove any oil from the drum.
1. Located underneath the outer bowl housing, remove the
battery box cover and install four AA batteries in the battery
box (Fig.1A). Optionally, instead of batteries, a micro USB port
(Fig.2B) located underneath the on/o fan switch (Fig.2A), can
be used with a power source to operate the grill.
Parts
Preparation
1. Remove outer packaging.
2. Disassemble the grill and all components.
3. Check the contents of the Lippert Odyssey Portable
Grill carefully and make sure all items are included.
A
B
C
D
E
F
Callout Description
A Charcoal Container Cover
B Stainless Steel Barbecue Grate
C Perforated Stainless Steel Charcoal Container
D Ignition Plate
E Stainless Steel Basin
F Outer Bowl Housing
G BONUS Carrying Case and Cooler
H Gripping Tongs
I Grill Plate
G
H
I
Fig.1 Fig.2
A
A
B
To Next Page
Loading...