12/15/2022
4
OPERATION
Release Steps
• Disengage transport lock.
• Firmly grasp and pull out the vertically stored SolidStep and
firmly rest it on the ground.
Storage of Steps
• Lift up SolidStep to its stored position and make sure the
transport lock has been engaged.
Leg Extension Adjustment
The leg extension is secured with a quick release clevis pin.
Adjustments can be made to the leg extensions in 1" increments by
extending or retracting the inner leg for the optimal angle, and to
adjust for the ground surface angle.
Extend Inner Leg
• Remove the quick release clevis pin from the tube and the slot
in the angle.
• Extend the inner leg to the ground and at an angle so the steps
are parallel to the ground and level. Reinsert the quick release
clevis pin into the tube and slot closest to where the inner leg
and tube meet.
Retract Inner Leg
• Remove the quick release clevis pin from the tube and slot.
• Retract the inner leg.
• Insert quick release clevis pin in the tube and slot.
Tube
Clevis Pin
Inner Leg
TECHNICAL SUPPORT
Question and Answer
If you have questions, please feel free to ask
us now. Otherwise, we are available and
happy to discuss anything presented with you.
www.Lippert.com 432–LIPPERT
customerservice@lci1.com
7
8
To Previous Page
Loading...