Liquid Image VideoMask UDM 310 - 3.0 Camera Mask Set up; 3.1 Inserting or Replacing Batteries; 3.2 Inserting Micro SD or SDHC Memory Card; 3.3 Storage Compartment

8 pages

Save Page as PDF

To Next Page

To Previous Page

Main Page

1.0 Get to Know Your Camera Mask - Videomasktm1
1.1 Features1
1.2 Specifications1
1.3 System Requirements1
2.0 Functional Parts2
2.1 Included Parts and Accessories2
2.2 Part Names - Front View2
2.3 Part Names - Back View2
2.4 Part Names - Exploded View2
3.0 Camera Mask Set up3
3.1 Inserting or Replacing Batteries3
3.2 Inserting Micro SD or SDHC Memory Card3
3.3 Storage Compartment3
3.4 Setting the Date and Time Mode3
4.0 Recording Pictures and Video3
4.1 Still Image Mode3
4.2 Video Mode3
4.3 Power off4
5.0 Transferring Still Images and Video to a Computer4
5.1 Opening Memory Compartment4
5.2 Connecting and Transferring Files4
5.3 Disconnecting and Closing Memory Compartment4
6.0 Camera Test Instructions4
6.1 Part One - Taking Test Images and Videos4
6.2 Part Two - File Size Test4
6.3 Part Three - Using the Cross Hairs (View Finders)5
6.4 Part Four - Testing the Camera Mask in Water5
7.0 Using the Third Party Software5
7.1 Installation5
7.2 Photo Editing5
7.3 Video Editing5
8.0 Care and Maintenance5
9.0 Camera Warnings and Precautions6
10.0 Mask Warnings and Precautions6
11.0 Battery Warnings and Precautions6
12.0 Commonly Asked Questions and Troubleshooting6
13.0 Accessories and Software7

Liquid Image VideoMask UDM 310 - 3.0 Camera Mask Set up; 3.1 Inserting or Replacing Batteries; 3.2 Inserting Micro SD or SDHC Memory Card; 3.3 Storage Compartment

Liquid Image VideoMask UDM 310 - 3.0 Camera Mask Set up; 3.1 Inserting or Replacing Batteries; 3.2 Inserting Micro SD or SDHC Memory Card; 3.3 Storage Compartment

Table of Contents