©2021 Liquid Instruments Visit liquidinstruments.com or email support@liquidinstruments.com for assistance.
Moku:Pro Layout
Moku:Pro
Quick Start Guide
Powering On & O
1
Connect the power cable to the power port at the rear of the Moku:Pro.
2
Press and hold the power button for one second until the power status LED turns on.
3
Once the power status LED turns solid white, your device is ready to use.
Installing The Moku: App
X
To power o your Moku:Pro, press and hold the power button for one second until the status LEDs turn solid
orange and the UFO LEDs are o. Wait until the device turns o before unplugging the power cable.
iPad App
1
Open the App Store on your iPad.
2
Search for the Moku: application and verify that the
publisher is Liquid Instruments.
3
Download and Install Moku: App on your iPad.
4
Open the Moku: App and when prompted for
permission to find and connect to devices on the
local network, grant access to discover and connect
to your Moku:Pro.
Status LEDs
Moku:Pro's status LEDs indicate the current device mode.
Desktop App
1
Download the software from Liquid Instruments
Website
Resources > Windows & macOS Apps.
2
Windows: Run the installer and follow the prompts
to install the Moku: App.
Mac: Drag the icon to your Applications folder to
install the application.
LED
Device Status
LED 1 green
• • •
Access point ON
LED 1 blue
• • •
WiFi connected
LED 1 white
•• • •
Access point ON
WiFi connected
LED 2 blue
• • •
Ethernet connected
LED 3 blue
• • •
External 10 MHz
reference locked
LED
Device Status
All LEDs
solid orange
• • •
Power o
All LEDs
cycling orange
• • •
Firmware update
All LEDs
flashing red
• • •
Recovery mode
To Next Page
Need help?
General
