• To remove the lter mounted on the water inlet valve, use long nose pliers to gently
pull on the plastic bar inside the lter.
• A second lter is mounted on the end of the water inlet hose to be connected to the
tap. To remove the second lter, use long nose pliers to gently pull on the plastic
bar inside the lter.
• Thoroughly clean the lter using a soft brush and wash with soapy water, then rinse
thoroughly. Push the lter back in place by pressing it lightly.
WARNING: The lters on the water inlet valve can become clogged as
a result of poor water quality or lack of maintenance. This may cause
leaks. Such incidents are not covered by the warranty.
dRAIN pump fILTeR
The washing machine's drain pump lter system helps extend the life of the pump
by preventing lint from getting inside. We recommend cleaning the drain pump lter
every 2 months.
The drain pump lter is located behind the panel in the lower right corner of the front
of the machine.
EN
61 V.1.0
To Next Page
Loading...
