Lite-Check CERTIFIER 1200 - Page 5

Description
► Electronic diagnostic tester for heavy-duty trailers and dollies.
► Tests12V7pinlightingsystemsforshorts,chas s is shorts,opens,andopenground s .
► Tests air brake systems for leaks, proper operation, and apply/release timing (FMVSS 121).
► Tests service/control line pressure differential for trailers/dollies equipped to tow other vehicles.
► Gathers and interprets 121 brake response data to tester via remote data acquisition hub.
► Operates via tablet for remote control operation, or personal computer Graphical Use Interface
(GUI).
► Remote tablet provides convenient service brake cycling for slack adjustment verification.
► Remote tablet allows for efficient verification of vehicle lamp operation.
► Allows test data, including brake timing, to be saved to the computer and/or to be printed.
► Performs all ABS tests and configuring following manufacturers procedures.
► Reads and writes the following ABS manufacturers; Bendix, Haldex and Meritor-Wabco.
Key Features of the Certifier 1200
► GUI display for test results.
► System voltage display.
► System amp-draw display.
► Automatic fault alarm.
► Tablet for remote control operation provides one-person operation and testing.
► Overload protection prevents vehicle-wiring damage resulting from shorts to ground.
► User friendly brake inspections, air-leak tests and 121 brake timing tests.
► “Differential Kit” (for timing-testing dollies and trailers equipped to tow other vehicles).
► For 121 Timing tests only, a minimum of 2 sensors are required per axle tested outside of the
US, and just one is required in the US.)
Set-up Requirements
Electrical power, 110 vac
Compressed air, filtered, dry, 110 psi @ 10 scfm
Computer printer included
3/8” air fittings for transducer connection into brake chambers
Lite-Check CERTIFIER 1200 Operations Manual
LITE-CHECK CERTIFIER 1200
5