To Next PageTo Next Page
Need help?Do you have a question about the Lite-Check INSPECTOR 930 and is the answer not in the manual?
Lists additional materials necessary for operating the INSPECTOR 930.
Explains the various messages and readings displayed on the tester's digital screen.
Details how to use the remote control and its operational range and features.
Instructions for connecting the tester to a 12VDC battery or regulated power supply.
Explains low voltage conditions and their impact on tester operation.
Provides an overview of electrical inspection using the INSPECTOR 930.
Details the process of performing electrical tests on trailer circuits.
Steps required before starting ABS testing procedures.
Specifies the necessary power supply requirements for ABS testing.
Procedure for testing the tractor's electrical output.
Procedure for testing the tractor's battery and alternator.
Procedure for testing the tractor's air output.
Explains the codes for ABS buttons and their functions.
Provides definitions for various terms used in the manual.
Defines common electrical circuit conditions and faults.
Lists important reminders for using the Inspector Trailer Interface and tablet.
Step-by-step guide for performing a DOT inspection using the tablet.
Illustrates the recommended operating procedure for the Lite-Check system.
Describes how to view and locate inspection reports in the cloud.
Instructions on how to delete inspection reports from the cloud.
General| Category | Test Equipment |
|---|---|
| Product Name | INSPECTOR 930 |
| Manufacturer | Lite-Check |
| Power Supply | 12V DC |
| Temperature Compensation | Automatic |
| Operating Temperature | 0-50°C |
