LITE-CHECK INSPECTOR 930
43
To Disconnect and Re-Connect the Table with The Trailer Interface
Disconnecting: there are two different ways to disconnect from the Trailer Interface. If you want to disconnect
from the one, and connect to another, tap on the Bluetooth icon in the top left corner and simply select the other
device you want to connect to. The previous Trailer Interface will disconnect automatically. If you just want to
disconnect from the Trailer Interface and not connect another one, simply tap the “Disconnect” button on the
top of the dialog that opens.
Re-Connecting: With the Inspector powered on, start the Lite-Check DOT app. After a few seconds the tablet
should automatically connect. If for any reason it does not, press the Bluetooth icon in the upper left corner and
select the Verifier from the list.
The DOT APP Crashed
Every effort has been made to test the application thoroughly and find bugs prior to release. However, bugs can
still occur, including unforeseen interactions with new versions of the Android OS or differences in hardware
between various manufacturers devices. If you encounter a crash or bug, we want to know! The Android system
will automatically close the app in most cases. Restart the Lite-Check DOT app and select “View Log” from the
menu. A dialog will appear with diagnostic information about the most recent problem the app encountered.
Please tap the “Send Error Report” button and select an e-mail application. Please enter as much information as
possible about what you were doing prior to the crash and any other details that may help us find the problem
and then send the e-mail (the Lite-Check Verifier technical support e-mail address is automatically set as the
destination). If Wi-Fi with Internet access is not available in your shop please call Lite-Check technical support.
To Next Page
Loading...