LITE-CHECK INSPECTOR 930
37
14. On any of these screens you may press the “Note/Pic” icon at the bottom of the screen to enter a note and/or
take a picture for a specific item in the list.
15. To move to a specific part of the inspection at any time, select “Overhead View” from the menu then select
the location you wish to visit (front, left, rear, right, undercarriage, and top). If you loaded a previous
inspection you can go to any point for review, but if this is a new inspection you cannot select a point
beyond your current progress, you must advance in sequence around the trailer.
16. After the last screen (top), a report summary will be displayed showing ABS details and a list of OOS items,
including notes and pictures if any. You may tap “Summit” to send the report to the Lite-Check cloud for
secure storage, reporting, analytics, viewing, and printing, or tap “Modify” to go back and repeat tests or
modify selections and entered values.
The threshold at which measured values are considered out of service may be specific for tire pressure, tread
depth, brake pad/shoe thickness, and air leak rate (both emergency and service). Any values less than the
specified threshold will be considered OOS and marked as such on the report (except, of course, for air leak,
where values greater than the threshold are OOS).
Thresholds can be changed on the Lite-Check Cloud by administrators.
To Next Page
Loading...
